It's Spring Break. My house has been under construction for the last 2 1/2 weeks and I was going CRAZY cooped up in my house!
A few weeks ago, I mentioned to my dad that I liked the look of the frames around the large bathroom mirrors. Well, it just so happened that I have one of those large, obnoxious mirrors mirrors in my master bathroom.
Well, my dad showed up on Monday morning and was ready to DIY with me. So we got started. It was surprisingly easy!
Step 1: Pick the Frame
Well, you don't pick your frame, that would be too easy. And probably pretty expensive. Instead, pick out your desired trim (or crown molding). I picked a wide trim. It was even pre-primed for me! I picked up 19 feet (I measured before going). The great thing about Home Depot is that you can cut your pieces there and only pay for exactly what you need. The pieces came in 16 foot pieces, but I was able to just buy the 19 feet I needed. I love saving money! My total was $24.70 ($1.30 per foot).
Step 2: Cutting the Trim
I know I said you can cut your trim at the store, but you can't cut the 45 degree angles you need. So, we brought the pieces home and my dad cut them at 45 degrees for me (he knows better than to let me try that).
Step 3: Build the Frame
We planned to put the frame together (with a nail gun) and then put it up, but it just wasn't worth the effort. We ended up just caulking it straight to the mirror (bottom piece, then both sides, then the top). Make sure that you tape it to the mirror while it dries.
Step 4: Painting the Frame
Make sure you wait 24 hours before removing the tape (to ensure that it's completely dry). Even still, hold the frame still while you pull off the tape. You don't want to pull it away from the mirror. The color might not look too differently from the primer. It's not. It's a creamy white/eggshell color. The real point of painting it though was to make sure that it is sealed off. I used a semi-gloss (since it will come in contact with water every once in a while). And that's it! You're done!!!
Here is the breakdown of the project:
- Time: 1-2 hours (not including drying time)
- Paint: $0 (I used left over paint)
- Trim: $24.70
For a few hours and less than $25, I'd say that's a success!




































